Specifications
Specs
Output0.330 hp
Phase1
Synchronous Speed1,200 rpm
Frequency60.00 Hz
Voltage115 V
230 V
230 V
Frame MaterialSteel
Frame48Z
XP Class and GroupNONE
XP DivisionNot Applicable
BrandBaldor-Reliance
Agency ApprovalsCSA
UR
UR
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorResilient
Bearing Grease TypePOLYREX EM (-20F +300F)
BlowerNone
Current5.6 A @ 115 V
2.8 A @ 230 V
2.8 A @ 230 V
Design Code-
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load54.0%
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNo feedback
Front Face CodeResilient Mount
Front Shaft IndicatorNone
Heater IndicatorNo heater
High Voltage Full Load Amps2.8 A
Insulation ClassB
Inverter CodeNot inverter
KVA CodeF
Lifting LugsNo Lifting Lugs
Locked Bearing IndicatorNo Locked Bearing
Motor Lead ExitTerminal Panel
Motor Lead Quantity/Wire Size7 @ 18 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type3421C
Number of Poles6
Overall Length11.97 in
Power Factor67
Product FamilyGeneral Purpose
Pulley End Bearing TypeBall
Pulley Face CodeResilient Mount
Pulley Shaft IndicatorStandard
Rodent ScreenNone
RoHS StatusRoHS Compliant
Service Factor1.00
Shaft Diameter0.500 in
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorNo Slinger
Speed1,100 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNONE (OLD)
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1Automatic Thermal Overload
Winding Thermal 1 LocationSB
Winding Thermal 2None
Applications
- Confinement Houses
- Exhaust Fans
- Air Handling Fans
- Unit Heaters
Features
- Double sealed ball bearings,
- Rugged steel frame
- Corrosion resistant epoxy fi nish
- 1†Extended thru bolts
- Permanent split capacitor
Nameplate
Nameplate
| CAT.NO. | CHC3417A | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPEC. | 34K52-5633 | |||||||||||||||||||||||||||||
| HP | .33 | |||||||||||||||||||||||||||||
| VOLTS | 115/230 | |||||||||||||||||||||||||||||
| AMP | 5.6/2.8 | |||||||||||||||||||||||||||||
| RPM | 1100 | |||||||||||||||||||||||||||||
| FRAME | 48Z | HZ | 60 | PH | 1 | |||||||||||||||||||||||||
| SER.F. | 1.00 | CODE | F | DES | - | CL | B | |||||||||||||||||||||||
| NEMA-NOM-EFF | 54 | PF | 67 | |||||||||||||||||||||||||||
| RATING | 40C AMB-CONT | |||||||||||||||||||||||||||||
| CC | USABLE AT 208V | |||||||||||||||||||||||||||||
| DE | 6203 | ODE | 6203 | |||||||||||||||||||||||||||
| ENCL | TEAO | SN | ||||||||||||||||||||||||||||
| NP1280L | ||||||||||||||||||||||||||||||
Performance
Performance
Performance at 230 V, 60 Hz, 0.33 hp
Typical performance; not guaranteed values.General Characteristics
Full Load Torque0 LB-FT
No-Load Current0 A
Line-Line Res. @ 25° C8.28 Ohms A Ph / 25.1 Ohms B Ph
Temp. Rise @ Rated Load
Temp. Rise @ S.F. Load
Start ConfigurationDOL
Break-Down Torque3.5 LB-FT
Pull-Up Torque0.88 LB-FT
Locked-Rotor Torque1 LB-FT
Starting Current7.6 A
Load Characteristics
| Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. |
|---|---|---|---|---|---|---|---|---|
| Power Factor | 34.0 | 43.0 | 53.0 | 61.0 | 67.0 | 72.0 | 76.0 | 0.0 |
| Efficiency | 0.0 | 22.0 | 39.0 | 49.0 | 54.0 | 56.0 | 54.0 | 0.0 |
| Speed (RPM) | 1,192 | 1,180 | 1,161 | 1,142 | 1,118 | 1,090 | 1,048 | 0 |
| Line Amps | 2.45 | 2.43 | 2.48 | 2.61 | 2.81 | 3.09 | 3.50 | 0.00 |
Performance Curves
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor