CFDL3516TM Baldor 2HP Agri-Duty Electric Motor, 1725 RPM

$599.97 USD

Shipping calculated at checkout

Baldor Electric Company SKU: CFDL3516TM Barcode: 781568134498

TEFC, 56CHZ Frame, 115/208-230V 1-Phase 60Hz, C-Face, Foot Mounted

Specifications

Specs

Output2.000 hp
Phase1
Synchronous Speed1,800 rpm
Frequency60.00 Hz
Voltage230 V
Frame MaterialSteel
Frame56CHZ
XP Class and GroupNONE
XP DivisionNot Applicable
BrandBaldor-Reliance
Agency ApprovalsCSA
UR
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorRigid
Bearing Grease TypePOLYREX EM (-20F +300F)
BlowerNone
Current8.9 A @ 208 V
7.9 A @ 230 V
Design CodeL
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load82.5%
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNo feedback
Front Face CodeStandard
Front Shaft IndicatorNone
Heater IndicatorNo heater
High Voltage Full Load Amps7.9 A
Insulation ClassF
Inverter CodeNot inverter
KVA CodeH
Lifting LugsNo Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKO Box
Motor Lead Quantity/Wire Size2 @ 16 AWG, A PH
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type3535LC
Number of Poles4
Overall Length14.13 in
Power Factor99
Product FamilyGeneral Purpose
Product TypeFarm Duty
Pulley End Bearing TypeSealed Bearing
Pulley Face CodeC-Face
Pulley Shaft IndicatorStandard
Rodent ScreenNone
Service Factor1.15
Shaft Diameter0.875 in
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorShaft Slinger
Speed1,740 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNone
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1Manual Thermal Overload
Winding Thermal 1 LocationKO
Winding Thermal 2None

Applications

  • Wide variety of agri-duty and industrial applications

Features

  • Sealed ball bearings
  • Lubricated with high temperature moisture resistant grease
  • Drive end seal and v-ring slinger to prevent moisture and contaminant ingress
  • Condensation drains
  • Gasketed cast conduit boxes
  • Epoxy paint protects motor from harsh environments

Nameplate

Nameplate

CAT.NO. CFDL3516TM
SPEC. 35E2321N499G1
HP 2
VOLTS 230
AMP 7.9
RPM 1740
FRAME 56CHZ HZ 60 PH 1
SER.F. 1.15 CODE H DES L CL F
NEMA-NOM-EFF 82.5 PF 99
RATING 40C AMB-CONT
CC USABLE AT 208V 8.9
DE 6205 ODE 6203
ENCL TEFC SN
NP1280L

Performance

Performance

Performance at 230 V, 60 Hz, 2 hp

Typical performance; not guaranteed values.

General Characteristics

Full Load Torque0 LB-FT
No-Load Current0 A
Line-Line Res. @ 25° C1.5935 Ohms A Ph / 3.2782 Ohms B Ph
Temp. Rise @ Rated Load75° C
Temp. Rise @ S.F. Load93° C
Start ConfigurationDOL
Break-Down Torque13.1 LB-FT
Pull-Up Torque12.2 LB-FT
Locked-Rotor Torque17.9 LB-FT
Starting Current58.5 A

Load Characteristics

Rated Load 0% 25% 50% 75% 100% 125% 150% S.F.
Power Factor 94.0 99.0 100.0 100.0 99.0 99.0 98.0 99.0
Efficiency 0.0 61.1 77.4 82.1 83.1 81.2 77.3 82.0
Speed (RPM) 1,799 1,787 1,773 1,758 1,739 1,717 1,687 1,726
Line Amps 1.22 2.65 4.18 5.92 7.87 10.10 12.80 9.21

Performance Curves

Performance at 208 V, 60 Hz, 2 hp

Typical performance; not guaranteed values.

General Characteristics

Full Load Torque0 LB-FT
No-Load Current0 A
Line-Line Res. @ 25° C1.62 Ohms A Ph / 3.25 Ohms B Ph
Temp. Rise @ Rated Load90° C
Temp. Rise @ S.F. Load
Start ConfigurationDOL
Break-Down Torque10.7 LB-FT
Pull-Up Torque10 LB-FT
Locked-Rotor Torque14.6 LB-FT
Starting Current52.8 A

Load Characteristics

Rated Load 0% 25% 50% 75% 100% 125% 150% S.F.
Power Factor 83.0 98.0 100.0 100.0 99.0 98.0 96.0 0.0
Efficiency 0.0 66.0 80.6 83.2 82.8 79.4 73.0 0.0
Speed (RPM) 1,799 1,784 1,768 1,749 1,726 1,696 1,650 0
Line Amps 1.25 2.75 4.46 6.44 8.73 11.50 15.30 0.00

Performance Curves

  • 115VAC
  • 208VAC
  • 230VAC
  • Electric Motor
  • 56CHZ
  • TEFC
  • Single Phase
  • 2HP
  • 1725RPM

Baldor Electric Company