00512EG3EL215T-W22 WEG 5HP Electric Motor, 1200RPM

$1,186.65 $1,465.00 Save $278.35

Shipping calculated at checkout

WEG Electric Corporation SKU: 00512EG3EL215T-W22 Barcode: 7891327884908

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame L213/5T
Output 5 HP (3.7 kW)
Number of Poles 6
Frequency 60 Hz
Rated speed 1170 rpm
Slip 2.50 %
Rated voltage 230/460 V
Rated current 13.6/6.80 A
L. R. Amperes 95.2/47.6 A
LRC 7.0x(Code J)
No load current 7.29/3.65 A
Rated torque 22.4 ft.lb
Locked rotor torque 190 %
Breakdown torque 250 %
Locked rotor time 126s (cold) 70s (hot)
Moment of inertia (J) 1.80 sq.ft.lb
Design A
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 55.0 dB(A)
Approx. weight³ 202 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
89.5  91.0  91.0 

Power factor

50% 75% 100%
0.56  0.68  0.75 
Frame L213/5T
Output 5 HP (3.7 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 965 rpm
Slip 3.50 %
Rated voltage 380 V
Rated current 8.05 A
L. R. Amperes 44.3 A
LRC 5.5x(Code G)
No load current 3.60 A
Rated torque 27.2 ft.lb
Locked rotor torque 150 %
Breakdown torque 200 %
Locked rotor time 108s (cold) 60s (hot)
Moment of inertia (J) 1.80 sq.ft.lb
Design A
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 53.0 dB(A)
Approx. weight³ 202 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
88.5  89.5  89.5 

Power factor

50% 75% 100%
0.62  0.73  0.78 
Frame L213/5T
Output 5 HP (3.7 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 970 rpm
Slip 3.00 %
Rated voltage 400 V
Rated current 7.69 A
L. R. Amperes 49.2 A
LRC 6.4x(Code H)
No load current 3.80 A
Rated torque 27.1 ft.lb
Locked rotor torque 180 %
Breakdown torque 229 %
Locked rotor time 108s (cold) 60s (hot)
Moment of inertia (J) 1.80 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 53.0 dB(A)
Approx. weight³ 202 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
89.5  90.2  90.2 

Power factor

50% 75% 100%
0.58  0.70  0.77 
Frame L213/5T
Output 5 HP (3.7 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 970 rpm
Slip 3.00 %
Rated voltage 415 V
Rated current 7.61 A
L. R. Amperes 55.6 A
LRC 7.3x(Code J)
No load current 4.00 A
Rated torque 27.1 ft.lb
Locked rotor torque 200 %
Breakdown torque 250 %
Locked rotor time 108s (cold) 60s (hot)
Moment of inertia (J) 1.80 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 53.0 dB(A)
Approx. weight³ 202 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
89.5  90.2  90.2 

Power factor

50% 75% 100%
0.56  0.68  0.75 

Features

Frame Material Cast Iron 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole NPT 1" 
Terminal Block Without 
Shaft Locking Device Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 6002 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector  
Connection Cables Quantity 9