00236EG3E145T-W22 WEG 2HP Electric Motor, 3600RPM

$526.50 $650.00 Save $123.50

Shipping calculated at checkout

WEG Electric Corporation SKU: 00236EG3E145T-W22 Barcode: 7891327883925

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 143/5T
Output 2 HP (1.5 kW)
Number of Poles 2
Frequency 60 Hz
Rated speed 3490 rpm
Slip 3.06 %
Rated voltage 230/460 V
Rated current 5.12/2.56 A
L. R. Amperes 42.0/21.0 A
LRC 8.2x(Code K)
No load current 2.20/1.10 A
Rated torque 3.01 ft.lb
Locked rotor torque 320 %
Breakdown torque 360 %
Locked rotor time 41s (cold) 23s (hot)
Moment of inertia (J) 0.0610 sq.ft.lb
Design A
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 68.0 dB(A)
Approx. weight³ 52.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
85.5  87.5  87.5 

Power factor

50% 75% 100%
0.69  0.80  0.84 
Frame 143/5T
Output 2 HP (1.5 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2855 rpm
Slip 4.83 %
Rated voltage 380 V
Rated current 3.05 A
L. R. Amperes 21.0 A
LRC 6.9x(Code H)
No load current 1.00 A
Rated torque 3.68 ft.lb
Locked rotor torque 280 %
Breakdown torque 310 %
Locked rotor time 28s (cold) 16s (hot)
Moment of inertia (J) 0.0610 sq.ft.lb
Design A
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 62.0 dB(A)
Approx. weight³ 52.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
85.0  86.0  86.0 

Power factor

50% 75% 100%
0.74  0.83  0.87 
Frame 143/5T
Output 2 HP (1.5 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2870 rpm
Slip 4.33 %
Rated voltage 400 V
Rated current 2.92 A
L. R. Amperes 21.9 A
LRC 7.5x(Code J)
No load current 1.10 A
Rated torque 3.66 ft.lb
Locked rotor torque 320 %
Breakdown torque 350 %
Locked rotor time 28s (cold) 16s (hot)
Moment of inertia (J) 0.0610 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 62.0 dB(A)
Approx. weight³ 52.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
85.0  86.2  86.2 

Power factor

50% 75% 100%
0.71  0.81  0.86 
Frame 143/5T
Output 2 HP (1.5 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2880 rpm
Slip 4.00 %
Rated voltage 415 V
Rated current 2.84 A
L. R. Amperes 22.7 A
LRC 8.0x(Code K)
No load current 1.20 A
Rated torque 3.65 ft.lb
Locked rotor torque 350 %
Breakdown torque 380 %
Locked rotor time 28s (cold) 16s (hot)
Moment of inertia (J) 0.0610 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 62.0 dB(A)
Approx. weight³ 52.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
85.5  86.5  86.5 

Power factor

50% 75% 100%
0.69  0.80  0.85 

Features

Frame Material Cast Iron 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole NPT 3/4" 
Terminal Block Without 
Shaft Locking Device Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 6002 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector