11036ET3Y315S/M-W22 WEG 150HP/110kW IEC TRU-Metric Electric Motor, 3600RPM

$18,706.02 USD $21,018.00 USD Save $2,311.98 USD

Shipping calculated at checkout

WEG Electric Corporation SKU: 11036ET3Y315S/M-W22 Barcode: 7891327428003

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 315S/M
Output 150 HP (110 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2980 rpm
Slip 0.67 %
Rated voltage 380 V
Rated current 193 A
L. R. Amperes 1467 A
LRC 7.6
No load current 47.0 A
Rated torque 261 ft.lb
Locked rotor torque 190 %
Breakdown torque 270 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 50.2 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 77.0 dB(A)
Approx. weight³ 2296 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
94.1  95.7  96.0 

Power factor

50% 75% 100%
0.83  0.89  0.90 
Frame 315S/M
Output 150 HP (110 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2980 rpm
Slip 0.67 %
Rated voltage 400 V
Rated current 186 A
L. R. Amperes 1562 A
LRC 8.4
No load current 50.0 A
Rated torque 261 ft.lb
Locked rotor torque 210 %
Breakdown torque 300 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 50.2 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 77.0 dB(A)
Approx. weight³ 2296 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
94.1  95.7  96.1 

Power factor

50% 75% 100%
0.80  0.87  0.89 
Frame 315S/M
Output 150 HP (110 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2980 rpm
Slip 0.67 %
Rated voltage 415 V
Rated current 181 A
L. R. Amperes 1629 A
LRC 9.0
No load current 54.0 A
Rated torque 261 ft.lb
Locked rotor torque 229 %
Breakdown torque 320 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 50.2 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 77.0 dB(A)
Approx. weight³ 2296 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
94.6  95.7  96.1 

Power factor

50% 75% 100%
0.78  0.86  0.88 
Frame 315S/M
Output 150 HP (110 kW)
Number of Poles 2
Frequency 60 Hz
Rated speed 3585 rpm
Slip 0.42 %
Rated voltage 460 V
Rated current 163 A
L. R. Amperes 1516 A
LRC 9.3
No load current 48.0 A
Rated torque 217 ft.lb
Locked rotor torque 250 %
Breakdown torque 370 %
Locked rotor time 106s (cold) 59s (hot)
Moment of inertia (J) 50.2 sq.ft.lb
Design N
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 81.0 dB(A)
Approx. weight³ 2296 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
92.4  94.1  95.0 

Power factor

50% 75% 100%
0.78  0.86  0.89 

Features

Frame Material Cast Iron 
Impregnation Method Constant Resin Flow 
Regreasing System At Drive end and Non-drive end 
Main terminal box hole 2xM63x1,5 
Terminal Block BMC - 6 pins 
Shaft Locking Device Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 5009 203A (ISO 12944 - C2) 
Grounding Lugs Double 
Fan Cover material Cast Iron 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap Yes- Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector