Specifications
Specs
Output1.000 hp
Phase3
Synchronous Speed1,800 rpm
Frequency60.00 Hz
Voltage460 V
230 V
230 V
Frame MaterialStainless Steel
Frame56C
XP Class and GroupNONE
XP DivisionNot Applicable
BrandBaldor-Reliance
Agency ApprovalsCSA
UR
UR
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorRigid
Bearing Grease TypePOLYREX EM (-20F +300F)
BlowerNone
Current3.0 A @ 208 V
2.9 A @ 230 V
1.5 A @ 460 V
2.9 A @ 230 V
1.5 A @ 460 V
Design CodeB
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load85.5%
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNo feedback
Front Face CodeStandard
Front Shaft IndicatorNone
Heater IndicatorNo heater
High Voltage Full Load Amps1.5 A
Insulation ClassF
Inverter CodeInverter ready
KVA CodeM
Lifting LugsNo Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKO Box
Motor Lead Quantity/Wire Size9 @ 18 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type3524M
Number of Poles4
Overall Length11.09 in
Power Factor76
Product FamilyWash Down All Stainless Steel
Pulley End Bearing TypeSealed Bearing
Pulley Face CodeC-Face
Pulley Shaft IndicatorStandard
Rodent ScreenNone
Service Factor1.15
Shaft Diameter0.625 in
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorNo Slinger
Speed1,745 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNONE (OLD)
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1None
Winding Thermal 2None
Applications
- Food processing
- Packaging
- Pumps and wastewater
- Wet environment
Features
- 300 series stainless steel motor frame, endplates, conduit box, shaft, base, and hardware
- Four condensate drains in each endplate
- Endplate rabbets sealed
- Lip and V-Ring seal on DE
- Labyrinth seals on DE and ODE
- 3 year warranty
Nameplate
Nameplate
| CAT.NO. | CESSWDM3546 | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPEC. | 35W899P560G1 | ||||||||||||||||||||||||||||
| HP | 1 | ||||||||||||||||||||||||||||
| VOLTS | 230/460 | ||||||||||||||||||||||||||||
| AMP | 2.9/1.45 | ||||||||||||||||||||||||||||
| RPM | 1745 | ||||||||||||||||||||||||||||
| FRAME | 56C | HZ | 60 | PH | 3 | ||||||||||||||||||||||||
| SER.F. | 1.15 | CODE | M | DES | B | CLASS | F | ||||||||||||||||||||||
| NEMA-NOM-EFF | 85.5 | PF | 76 | ||||||||||||||||||||||||||
| RATING | 40C AMB-CONT | ||||||||||||||||||||||||||||
| CC | 010A | USABLE AT 208V | 3 | ||||||||||||||||||||||||||
| DE | 6205 | ODE | 6203 | ||||||||||||||||||||||||||
| ENCL | TENV | SN | |||||||||||||||||||||||||||
| NP1953A01 | |||||||||||||||||||||||||||||
Performance
Performance
Performance at 460 V, 60 Hz, 1 hp
Typical performance; not guaranteed values.General Characteristics
Full Load Torque0 LB-FT
No-Load Current0 A
Line-Line Res. @ 25° C15.922 Ohms A Ph / 0 Ohms B Ph
Temp. Rise @ Rated Load61° C
Temp. Rise @ S.F. Load73° C
Start ConfigurationDOL
Break-Down Torque14.3 LB-FT
Pull-Up Torque8.76 LB-FT
Locked-Rotor Torque10.3 LB-FT
Starting Current13.5 A
Load Characteristics
| Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. |
|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 33.0 | 53.0 | 67.0 | 76.0 | 81.0 | 85.0 | 79.0 |
| Efficiency | 0.0 | 74.6 | 83.4 | 85.4 | 85.5 | 84.7 | 82.6 | 85.0 |
| Speed (RPM) | 1,799 | 1,784 | 1,774 | 1,760 | 1,744 | 1,731 | 1,698 | 1,736 |
| Line Amps | 0.89 | 0.94 | 1.05 | 1.22 | 1.45 | 1.70 | 1.99 | 1.60 |
Performance Curves
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor