WDL3514T Baldor 1.5HP Washdown Duty Electric Motor, 1725 RPM

$1,708.00

Shipping calculated at checkout

Baldor Electric Company SKU: WDL3514T Barcode: 781568746363

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Specifications

Specs

Output 1.500 hp
Phase 1
Synchronous Speed 1,800 rpm
Frequency 60.00 Hz
Voltage 115 V
230 V
Frame Material Steel
Frame 145T
XP Class and Group NONE
XP Division Not Applicable
Brand Baldor-Reliance
Agency Approvals CSA
UR
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator Rigid
Bearing Grease Type POLYREX EM (-20F +300F)
Blower None
Current 12.4 A @ 115 V
6.8 A @ 208 V
6.2 A @ 230 V
Design Code L
Drip Cover No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 80.0%
Electrically Isolated Bearing Not Electrically Isolated
Feedback Device No feedback
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No heater
High Voltage Full Load Amps 6.2 A
Insulation Class F
Inverter Code Not inverter
KVA Code J
Lifting Lugs No Lifting Lugs
Locked Bearing Indicator Locked Bearing
Motor Lead Exit KO Box
Motor Lead Quantity/Wire Size 4 @ 16 AWG, A&J
Motor Lead Termination Flying Leads
Motor Standards NEMA
Motor Type 3532LC
Number of Poles 4
Overall Length 14.18 in
Power Factor 96
Product Family Wash Down
Pulley End Bearing Type Sealed Bearing
Pulley Face Code Standard
Pulley Shaft Indicator Standard
Rodent Screen None
Service Factor 1.15
Shaft Diameter 0.875 in
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Fixed Opposite Standard
Shaft Slinger Indicator Shaft Slinger
Speed 1,725 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing NONE (OLD)
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None

Applications

  • Food processing
  • Wet environment
  • Packaging
  • Pumps and wastewater

Features

  • 300 series stainless steel hardware
  • Neoprene gaskets
  • Double sealed ball bearings
  • Lip and V-Ring seal on DE
  • Electrostatically applied epoxy finish
  • Stainless steel shaft extension

Nameplate

Nameplate

CAT.NO. WDL3514T
SPEC. 35E2676N568G1
HP 1.5
VOLTS 115/230
AMP 12.4/6.2
RPM 1725
FRAME 145T HZ 60 PH 1
SER.F. 1.15 CODE J DES L CLASS F
NEMA-NOM-EFF 80 PF 96
RATING 40C AMB-CONT
CC USABLE AT 208V 6.8
DE 6205 ODE 6203
ENCL TEFC SN
NP1496L

Performance

Performance

Performance at 230 V, 60 Hz, 1.5 hp

Typical performance; not guaranteed values.

General Characteristics

Full Load Torque 0 LB-FT
No-Load Current 0 A
Line-Line Res. @ 25° C 1.69 Ohms A Ph / 1.5344 Ohms B Ph
Temp. Rise @ Rated Load 69° C
Temp. Rise @ S.F. Load 82° C
Start Configuration DOL
Break-Down Torque 12.1 LB-FT
Pull-Up Torque 8.43 LB-FT
Locked-Rotor Torque 13.8 LB-FT
Starting Current 49.5 A

Load Characteristics

Rated Load 0% 25% 50% 75% 100% 125% 150% S.F.
Power Factor 54.0 83.0 91.0 95.0 96.0 96.0 96.0 96.0
Efficiency 0.0 58.3 74.3 79.3 81.2 80.3 77.8 80.7
Speed (RPM) 1,799 1,787 1,774 1,759 1,742 1,721 1,697 1,730
Line Amps 1.76 2.41 3.53 4.78 6.21 7.86 9.72 7.20

Performance Curves