00712ET3E254JM-W22 WEG 7.5HP JM Close Coupled Pump Electric Motor, 1200RPM

$1,988.55 $2,455.00 Save $466.45

Shipping calculated at checkout

WEG Electric Corporation SKU: 00712ET3E254JM-W22 Barcode: 7909158744176

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 254/6JM
Output 7.5 HP (5.5 kW)
Number of Poles 6
Frequency 60 Hz
Rated speed 1178 rpm
Slip 1.83 %
Rated voltage 230/460 V
Rated current 19.0/9.48 A
L. R. Amperes 129/64.5 A
LRC 6.8x(Code H)
No load current 9.00/4.50 A
Rated torque 33.4 ft.lb
Locked rotor torque 250 %
Breakdown torque 300 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 3.92 sq.ft.lb
Design B
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 59.0 dB(A)
Approx. weight³ 283 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
89.5  90.2  91.0 

Power factor

50% 75% 100%
0.63  0.74  0.80 
Frame 254/6JM
Output 7.5 HP (5.5 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 970 rpm
Slip 3.00 %
Rated voltage 380 V
Rated current 11.4 A
L. R. Amperes 59.3 A
LRC 5.2x(Code F)
No load current 4.50 A
Rated torque 40.6 ft.lb
Locked rotor torque 170 %
Breakdown torque 220 %
Locked rotor time 48s (cold) 27s (hot)
Moment of inertia (J) 3.92 sq.ft.lb
Design B
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 57.0 dB(A)
Approx. weight³ 283 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
87.5  88.0  88.0 

Power factor

50% 75% 100%
0.70  0.79  0.83 
Frame 254/6JM
Output 7.5 HP (5.5 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 975 rpm
Slip 2.50 %
Rated voltage 400 V
Rated current 11.0 A
L. R. Amperes 63.8 A
LRC 5.8x(Code G)
No load current 4.75 A
Rated torque 40.4 ft.lb
Locked rotor torque 200 %
Breakdown torque 240 %
Locked rotor time 48s (cold) 27s (hot)
Moment of inertia (J) 3.92 sq.ft.lb
Design B
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 57.0 dB(A)
Approx. weight³ 283 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
87.5  88.0  88.0 

Power factor

50% 75% 100%
0.66  0.77  0.82 
Frame 254/6JM
Output 7.5 HP (5.5 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 975 rpm
Slip 2.50 %
Rated voltage 415 V
Rated current 10.7 A
L. R. Amperes 66.3 A
LRC 6.2x(Code H)
No load current 4.95 A
Rated torque 40.4 ft.lb
Locked rotor torque 220 %
Breakdown torque 260 %
Locked rotor time 48s (cold) 27s (hot)
Moment of inertia (J) 3.92 sq.ft.lb
Design B
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 57.0 dB(A)
Approx. weight³ 283 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
87.5  88.0  88.0 

Power factor

50% 75% 100%
0.64  0.75  0.81 

Features

Frame Material Cast Iron 
Impregnation Method Dip and Bake Polyester 
Regreasing System At Drive end and Non-drive end 
Main terminal box hole NPT 1 1/2" 
Terminal Block Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 5009 203A (ISO 12944 - C3) 
Grounding Lugs Single 
Fan Cover material Cast Iron 
Tropicalized Painting Without 
Bearing cap Yes- Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Pump Seal Mechanical Seal 
Overload protector (phenolic) Without overload protector  
Connection Cables Quantity 12 
Fan material Plastic 
Screw cap CARBON STEEL SAE 1010/20 
NDE bearing Seal V'Ring 
DE bearing Seal V'Ring