02536ET3E256JM-S WEG 25HP JM Close Coupled Pump Electric Motor, 3600RPM

$2,617.11 USD $3,231.00 USD Save $613.89 USD

Shipping calculated at checkout

WEG Electric Corporation SKU: 02536ET3E256JM-S Barcode: 7909322142340

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 254/6JM
Output 25 HP (18.5 kW)
Number of Poles 2
Frequency 60 Hz
Rated speed 3530 rpm
Slip 1.94 %
Rated voltage 208-230/460 V
Rated current 63.0-57.0/28.5 A
L. R. Amperes 523-473/237 A
LRC 8.3x(Code J)
No load current 17.3-20.1/10.0 A
Rated torque 36.7 ft.lb
Locked rotor torque 240 %
Breakdown torque 340 %
Locked rotor time 14s (cold) 8s (hot)
Moment of inertia (J) 1.31 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 75.0 dB(A)
Approx. weight³ 245 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
91.0  91.7  91.7 

Power factor

50% 75% 100%
0.77  0.85  0.89 
Frame 254/6JM
Output 20 HP (15 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2930 rpm
Slip 2.33 %
Rated voltage 190/380 V
Rated current 55.8/27.9 A
L. R. Amperes 441/220 A
LRC 7.9x(Code J)
No load current 19.8/9.91 A
Rated torque 35.4 ft.lb
Locked rotor torque 229 %
Breakdown torque 330 %
Locked rotor time 14s (cold) 8s (hot)
Moment of inertia (J) 1.31 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 72.0 dB(A)
Approx. weight³ 245 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
92.3  92.4  91.9 

Power factor

50% 75% 100%
0.77  0.86  0.89 
Frame 254/6JM
Output 20 HP (15 kW)
Number of Poles 2
Frequency 50 Hz
Rated speed 2945 rpm
Slip 1.83 %
Rated voltage 220/415 V
Rated current 49.6/26.3 A
L. R. Amperes 442/234 A
LRC 8.9x(Code K)
No load current 21.6/11.4 A
Rated torque 35.2 ft.lb
Locked rotor torque 280 %
Breakdown torque 400 %
Locked rotor time 12s (cold) 7s (hot)
Moment of inertia (J) 1.31 sq.ft.lb
Design A
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 72.0 dB(A)
Approx. weight³ 245 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
91.9  92.6  92.3 

Power factor

50% 75% 100%
0.70  0.81  0.86 

Features

Frame Material Rolled Steel 
Impregnation Method Dip and Bake Polyester 
Regreasing System At Drive end and Non-drive end 
Main terminal box hole 1.732" 
Terminal Block Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting Munsell N 1 - Matte 207N (ISO 12944 - C2) 
Grounding Lugs Superior 
Fan Cover material Rolled Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap Yes- Bearing Cap 
Bolt Material Carbon Steel 
Balancing Method 1/2 Key 
Drip Cover Without 
Resilient Base Without