.7512ET3WAL90S-W22 WEG 1HP/0.75kW IEC TRU-Metric Electric Motor, 1200RPM

$434.97 $537.00 Save $102.03

Shipping calculated at checkout

WEG Electric Corporation SKU: .7512ET3WAL90S-W22 Barcode: 7909323282977

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 90S/L
Output 1 HP (0.75 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 940 rpm
Slip 6.00 %
Rated voltage 220/380 V
Rated current 3.28/1.90 A
L. R. Amperes 16.4/9.50 A
LRC 5.0
No load current 2.09/1.21 A
Rated torque 5.51 ft.lb
Locked rotor torque 220 %
Breakdown torque 250 %
Locked rotor time 46s (cold) 26s (hot)
Moment of inertia (J) 0.1561 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 45.0 dB(A)
Approx. weight³ 47.2 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
78.9  80.5  79.8 

Power factor

50% 75% 100%
0.52  0.67  0.75 
Frame 90S/L
Output 1 HP (0.75 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 945 rpm
Slip 5.50 %
Rated voltage 230/400 V
Rated current 3.25/1.87 A
L. R. Amperes 17.9/10.3 A
LRC 5.5
No load current 2.30/1.32 A
Rated torque 5.48 ft.lb
Locked rotor torque 260 %
Breakdown torque 300 %
Locked rotor time 46s (cold) 26s (hot)
Moment of inertia (J) 0.1561 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 45.0 dB(A)
Approx. weight³ 47.2 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
78.0  80.5  80.5 

Power factor

50% 75% 100%
0.49  0.63  0.72 
Frame 90S/L
Output 1 HP (0.75 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 950 rpm
Slip 5.00 %
Rated voltage 240/415 V
Rated current 3.18/1.84 A
L. R. Amperes 18.5/10.7 A
LRC 5.8
No load current 2.42/1.40 A
Rated torque 5.45 ft.lb
Locked rotor torque 290 %
Breakdown torque 330 %
Locked rotor time 46s (cold) 26s (hot)
Moment of inertia (J) 0.1561 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 45.0 dB(A)
Approx. weight³ 47.2 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
77.2  80.2  80.8 

Power factor

50% 75% 100%
0.47  0.60  0.70 
Frame 90S/L
Output 1 HP (0.75 kW)
Number of Poles 6
Frequency 60 Hz
Rated speed 1155 rpm
Slip 3.75 %
Rated voltage 460 V
Rated current 1.68 A
L. R. Amperes 10.8 A
LRC 6.4
No load current 1.23 A
Rated torque 4.49 ft.lb
Locked rotor torque 300 %
Breakdown torque 350 %
Locked rotor time 64s (cold) 36s (hot)
Moment of inertia (J) 0.1561 sq.ft.lb
Design N
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 50.0 dB(A)
Approx. weight³ 47.2 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
77.0  81.5  82.5 

Power factor

50% 75% 100%
0.46  0.59  0.68 

Features

Frame Material Aluminum 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole 2xM25x1,5 
Terminal Block BMC - 6 pins 
Shaft Locking Device Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 5009 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without