.7509ET3EAL100L-W22 WEG 1HP/0.75kW IEC TRU-Metric Electric Motor, 900RPM

$773.41 USD $869.00 USD Save $95.59 USD

Shipping calculated at checkout

WEG Electric Corporation SKU: .7509ET3EAL100L-W22 Barcode: 7909323280706

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 100L
Output 1 HP (0.75 kW)
Number of Poles 8
Frequency 50 Hz
Rated speed 710 rpm
Slip 5.33 %
Rated voltage 380 V
Rated current 2.30 A
L. R. Amperes 10.6 A
LRC 4.6
No load current 1.50 A
Rated torque 7.30 ft.lb
Locked rotor torque 160 %
Breakdown torque 200 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 0.3014 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 50.0 dB(A)
Approx. weight³ 59.5 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
73.9  76.1  75.1 

Power factor

50% 75% 100%
0.44  0.57  0.66 
Frame 100L
Output 1 HP (0.75 kW)
Number of Poles 8
Frequency 50 Hz
Rated speed 715 rpm
Slip 4.67 %
Rated voltage 400 V
Rated current 2.31 A
L. R. Amperes 10.6 A
LRC 4.6
No load current 1.60 A
Rated torque 7.25 ft.lb
Locked rotor torque 190 %
Breakdown torque 229 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 0.3014 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 50.0 dB(A)
Approx. weight³ 59.5 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
72.5  75.5  75.5 

Power factor

50% 75% 100%
0.41  0.53  0.62 
Frame 100L
Output 1 HP (0.75 kW)
Number of Poles 8
Frequency 50 Hz
Rated speed 720 rpm
Slip 4.00 %
Rated voltage 415 V
Rated current 2.34 A
L. R. Amperes 10.8 A
LRC 4.6
No load current 1.70 A
Rated torque 7.20 ft.lb
Locked rotor torque 220 %
Breakdown torque 270 %
Locked rotor time 54s (cold) 30s (hot)
Moment of inertia (J) 0.3014 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 50.0 dB(A)
Approx. weight³ 59.5 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
71.1  74.8  75.5 

Power factor

50% 75% 100%
0.38  0.50  0.59 
Frame 100L
Output 1 HP (0.75 kW)
Number of Poles 8
Frequency 60 Hz
Rated speed 870 rpm
Slip 3.33 %
Rated voltage 230/460 V
Rated current 4.22/2.11 A
L. R. Amperes 20.3/10.1 A
LRC 4.8
No load current 3.03/1.51 A
Rated torque 5.96 ft.lb
Locked rotor torque 200 %
Breakdown torque 270 %
Locked rotor time 109s (cold) 61s (hot)
Moment of inertia (J) 0.3014 sq.ft.lb
Design N
Insulation Class F
Service factor 1.25
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 54.0 dB(A)
Approx. weight³ 59.5 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
70.0  74.0  75.5 

Power factor

50% 75% 100%
0.38  0.50  0.59 

Features

Frame Material Aluminum 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole 2xM25x1,5 
Terminal Block BMC - 6 pins 
Shaft Locking Device Without 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 5009 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without