.5518EP3EAL80-W22 WEG 0.75HP/0.55kW IEC TRU-Metric Electric Motor, 1800RPM

$296.37 USD $333.00 USD Save $36.63 USD

Shipping calculated at checkout

WEG Electric Corporation SKU: .5518EP3EAL80-W22 Barcode: 7909323285138

30 Day
Return Policy

Ships Fast
in 24 hours

In stock!

Electric Motors

Frame 80
Output 0.75 HP (0.550 kW)
Number of Poles 4
Frequency 50 Hz
Rated speed 1410 rpm
Slip 6.00 %
Rated voltage 380 V
Rated current 1.35 A
L. R. Amperes 7.70 A
LRC 5.7
No load current 0.900 A
Rated torque 2.76 ft.lb
Locked rotor torque 220 %
Breakdown torque 250 %
Locked rotor time 18s (cold) 10s (hot)
Moment of inertia (J) 0.0574 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 44.0 dB(A)
Approx. weight³ 26.1 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
71.0  76.0  77.1 

Power factor

50% 75% 100%
0.62  0.74  0.80 
Frame 80
Output 0.75 HP (0.550 kW)
Number of Poles 4
Frequency 50 Hz
Rated speed 1435 rpm
Slip 4.33 %
Rated voltage 400 V
Rated current 1.31 A
L. R. Amperes 7.47 A
LRC 5.7
No load current 1.00 A
Rated torque 2.71 ft.lb
Locked rotor torque 250 %
Breakdown torque 270 %
Locked rotor time 18s (cold) 10s (hot)
Moment of inertia (J) 0.0574 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 44.0 dB(A)
Approx. weight³ 26.1 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
71.5  76.3  77.7 

Power factor

50% 75% 100%
0.58  0.71  0.78 
Frame 80
Output 0.75 HP (0.550 kW)
Number of Poles 4
Frequency 50 Hz
Rated speed 1455 rpm
Slip 3.00 %
Rated voltage 415 V
Rated current 1.30 A
L. R. Amperes 7.41 A
LRC 5.7
No load current 1.10 A
Rated torque 2.67 ft.lb
Locked rotor torque 280 %
Breakdown torque 290 %
Locked rotor time 18s (cold) 10s (hot)
Moment of inertia (J) 0.0574 sq.ft.lb
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 44.0 dB(A)
Approx. weight³ 26.1 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
72.0  76.5  78.3 

Power factor

50% 75% 100%
0.53  0.67  0.75 
Frame 80
Output 0.75 HP (0.550 kW)
Number of Poles 4
Frequency 60 Hz
Rated speed 1740 rpm
Slip 3.33 %
Rated voltage 230/460 V
Rated current 2.50/1.25 A
L. R. Amperes 18.8/9.38 A
LRC 7.5
No load current 1.76/0.880 A
Rated torque 2.23 ft.lb
Locked rotor torque 320 %
Breakdown torque 360 %
Locked rotor time 18s (cold) 10s (hot)
Moment of inertia (J) 0.0574 sq.ft.lb
Design N
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 48.0 dB(A)
Approx. weight³ 26.1 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
72.0  76.5  77.0 

Power factor

50% 75% 100%
0.50  0.63  0.72 

Features

Frame Material Aluminum 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole NPT 3/4" 
Terminal Block BMC - 6 pins 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 7022 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector