{"title":"Footed, C-Face, NEMA Premium (HB_C)","description":"","products":[{"product_id":"hb0012c-1-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0012C 1 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346542685,"sku":"HB0012C","price":787.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/C69I17D0335RON50.jpg?v=1766444874"},{"product_id":"hb0014c-1-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0014C 1 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346575453,"sku":"HB0014C","price":783.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/K8PU6TD0335RON50.jpg?v=1766444874"},{"product_id":"hb0016c-1-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0016C 1 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346640989,"sku":"HB0016C","price":841.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/SKCHCJE0335RON50.jpg?v=1766444875"},{"product_id":"hb0022c-2-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0022C 2 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346739293,"sku":"HB0022C","price":820.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/G5TKKKF0335RON50.jpg?v=1766444877"},{"product_id":"hb0024c-2-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0024C 2 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346804829,"sku":"HB0024C","price":844.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/ORJDQAG0335RON50.jpg?v=1766444877"},{"product_id":"hb0026c-2-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0026C 2 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346935901,"sku":"HB0026C","price":1095.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/GNP401H0335RON50.jpg?v=1766444879"},{"product_id":"hb0032c-3-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0032C 3 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915346968669,"sku":"HB0032C","price":970.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/KC2GADI0335RON50.jpg?v=1766444880"},{"product_id":"hb0034c-3-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0034C 3 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347034205,"sku":"HB0034C","price":970.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CU01EOI0335RON50.jpg?v=1766444882"},{"product_id":"hb0036c-3-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0036C 3 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347099741,"sku":"HB0036C","price":1532.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/4HU8JEJ0335RON50.jpg?v=1766444882"},{"product_id":"hb0052c-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0052C 5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347198045,"sku":"HB0052C","price":1124.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/O1FCRFK0335RON50.jpg?v=1766444884"},{"product_id":"hb0054c-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0054C 5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347263581,"sku":"HB0054C","price":1092.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0QRI06L0335RON50.jpg?v=1766444884"},{"product_id":"hb0056c-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0056C 5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347329117,"sku":"HB0056C","price":1646.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/8S7V3HL0335RON50.jpg?v=1766444887"},{"product_id":"hb0102c-10-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0102C 10 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347427421,"sku":"HB0102C","price":1568.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CU0LBIM0335RON50.jpg?v=1766444887"},{"product_id":"hb0104c-10-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0104C 10 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347492957,"sku":"HB0104C","price":1597.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/4559H8N0335RON50.jpg?v=1766444889"},{"product_id":"hb0106c-10-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0106C 10 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347558493,"sku":"HB0106C","price":2460.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CCQB5MP0335RON50.jpg?v=1766444890"},{"product_id":"hb0152c-15-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0152C 15 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347656797,"sku":"HB0152C","price":2088.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0TAFDNQ0335RON50.jpg?v=1766444891"},{"product_id":"hb0154c-15-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0154C 15 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347722333,"sku":"HB0154C","price":2081.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/OED0JDR0335RON50.jpg?v=1766444892"},{"product_id":"hb0156c-15-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0156C 15 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347787869,"sku":"HB0156C","price":3013.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0G2MO3S0335RON50.jpg?v=1766444892"},{"product_id":"hb0202c-20-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0202C 20 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347886173,"sku":"HB0202C","price":2494.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/K0JP05T0335RON50.jpg?v=1766444895"},{"product_id":"hb0204c-20-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0204C 20 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915347951709,"sku":"HB0204C","price":2460.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CSSG86U0335RON50.jpg?v=1766444895"},{"product_id":"hb0206c-20-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0206C 20 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348017245,"sku":"HB0206C","price":3636.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/KTH6ESU0335RON50.jpg?v=1766444896"},{"product_id":"hb0252c-25-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0252C 25 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348115549,"sku":"HB0252C","price":2847.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/O8FBKIV0335RON50.jpg?v=1766444897"},{"product_id":"hb0254c-25-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0254C 25 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348213853,"sku":"HB0254C","price":2813.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/G23LSJ01335RON50.jpg?v=1766444901"},{"product_id":"hb0256c-25-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0256C 25 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348246621,"sku":"HB0256C","price":4332.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/OQFR1A11335RON50.jpg?v=1766444904"},{"product_id":"hb0302c-30-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0302C 30 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348344925,"sku":"HB0302C","price":3034.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/C022AB21335RON50.jpg?v=1766444904"},{"product_id":"hb0306c-30-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0306C 30 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348410461,"sku":"HB0306C","price":4637.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CLFMKN31335RON50.jpg?v=1766444906"},{"product_id":"hb0304c-30-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0304C 30 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348508765,"sku":"HB0304C","price":3034.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/4JV9F131335RON50.jpg?v=1766444906"},{"product_id":"hb0402c-40-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0402C 40 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348574301,"sku":"HB0402C","price":4199.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/GFKL0451335RON50.jpg?v=1766444909"},{"product_id":"hb0404c-40-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0404C 40 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348639837,"sku":"HB0404C","price":4086.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/OH426Q51335RON50.jpg?v=1766444909"},{"product_id":"hb0406c-40-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0406C 40 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348705373,"sku":"HB0406C","price":6863.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0VIBBG61335RON50.jpg?v=1766444909"},{"product_id":"hb0502c-50-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0502C 50 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348803677,"sku":"HB0502C","price":4835.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/49PPJH71335RON50.jpg?v=1766444912"},{"product_id":"hb0504c-50-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0504C 50 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348869213,"sku":"HB0504C","price":4728.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CB96P781335RON50.jpg?v=1766444912"},{"product_id":"hb0506c-teco-westinghouse-50hp-ieee-841-severe-duty-electric-motor-1200-rpm","title":"HB0506C Teco-Westinghouse 50HP IEEE 841 Severe Duty Electric Motor, 1200 RPM","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 50 HP\r\n • 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915348967517,"sku":"HB0506C","price":7972.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/4J8HUT81335RON50.jpg?v=1766444914"},{"product_id":"hb0602c-60-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0602C 60 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349033053,"sku":"HB0602C","price":7392.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/8JBP6V91335RON50.jpg?v=1766444915"},{"product_id":"hb0604c-60-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0604C 60 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349098589,"sku":"HB0604C","price":7175.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0GC7CLA1335RON50.jpg?v=1766444916"},{"product_id":"hb0606c-60-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0606C 60 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349164125,"sku":"HB0606C","price":8937.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/8SVPHBB1335RON50.jpg?v=1766444917"},{"product_id":"hb0752c-75-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0752C 75 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349262429,"sku":"HB0752C","price":8375.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/SBL6QCC1335RON50.jpg?v=1766444919"},{"product_id":"hb0754c-75-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0754C 75 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349327965,"sku":"HB0754C","price":8008.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/KUEETNC1335RON50.jpg?v=1766444919"},{"product_id":"hb0756c-75-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB0756C 75 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349393501,"sku":"HB0756C","price":9728.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/SK975PD1335RON50.jpg?v=1766444921"},{"product_id":"hb1-52c-1-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB1\/52C 1.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349491805,"sku":"HB1\/52C","price":796.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0B59BFE1335RON50.jpg?v=1766444922"},{"product_id":"hb1-54c-1-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB1\/54C 1.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349590109,"sku":"HB1\/54C","price":832.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/OL51QBK1335RON50.jpg?v=1766444923"},{"product_id":"hb1-56c-1-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB1\/56C 1.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349655645,"sku":"HB1\/56C","price":970.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/0OLDV1L1335RON50.jpg?v=1766444924"},{"product_id":"hb1002c-100-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB1002C 100 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349753949,"sku":"HB1002C","price":10509.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/K86H73M1335RON50.jpg?v=1766444926"},{"product_id":"hb1004c-100-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB1004C 100 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915349819485,"sku":"HB1004C","price":9809.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/C57VCPM1335RON50.jpg?v=1766444926"},{"product_id":"hb7-52c-7-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB7\/52C 7.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915351228509,"sku":"HB7\/52C","price":1463.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/SU2RUV42335RON50.jpg?v=1766444949"},{"product_id":"hb7-54c-7-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB7\/54C 7.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915351294045,"sku":"HB7\/54C","price":1487.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/K6264M52335RON50.jpg?v=1766444950"},{"product_id":"hb7-56c-7-5-hp-teco-westinghouse-ieee-841-severe-duty","title":"HB7\/56C 7.5 HP Teco-Westinghouse IEEE 841 Severe Duty","description":"\r\nAPPLICATIONS:\r\n\r\n • Fans \u0026amp; Blowers\r\n • Compressors\r\n • Any Severe Duty\/ Petro-Chem\/\r\n • Pumps\r\n • Mixers Pulp \u0026amp; Paper Application\r\n • Crushers\r\n • Conveyors\r\n\r\nFEATURES:\r\n\r\n • 1 - 500 hp\r\n • 3600, 1800, 1200 RPM\r\n • Totally Enclosed Fan Cooled (IP55 Rating)\r\n • Meets or Exceeds IEEE 841 Standards - Note (1)\r\n • Meets GM 7E-TA Specifications\r\n • Meets IEEE 45 Marine Duty and ABS \"Design Assessment\" up to 150 hp\r\n • NEMA Premium Efficient\r\n • Department of Energy Efficiency Certification #CC002A\r\n • 60 Month Warranty from Date of Manufacture\r\n • 3 Phase, 60 Hz , 460V\r\n • 1.15 Service Factor – Continuous\r\n • NEMA Design B Torques as a Minimum\r\n • Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes\r\n • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrance –\r\n F1 Mounted. F2 Available – See EXTRAS\/ OPTIONS Below\r\n • Designed for 40°C Ambient Temperature or 50°C @ 1.0 S.F. - Note (2)\r\n • Designed for 3300 ft. Elevation - Note (2)\r\n • CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non-Sparking, Non-Static Fan\r\n • Bidirectional Rotation\r\n • Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box\r\n • Dual Drilled Feet – Longer Frames. (i.e. 145T Drilled Also for 143T)\r\n • 1045 Carbon Steel Shaft\r\n • Aluminum Die Cast Squirrel Cage Rotor Construction\r\n • Paint System: 2 Part Epoxy\r\n • Paint Color: Blue – Munsell 5PB 3\/ 8\r\n • Single Shielded Regreasable Bearings with Polyrex Grease\r\n • Vacuum De-Gassed Re-Greasable Ball Bearings for Frames 280TS - 5808B Using Polyrex EM Grease\r\n • Automatic Grease Discharge Fittings on Frames on Re-Greasable motors\r\n • Grounding Terminal Inside Main Box with Provisions for Grounding on Frame\r\n • Stainless Steel Nameplate and Hardware\r\n • Stainless Steel Automatic Breather Drains\r\n • UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part 31 - Note (3)\r\n • Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200V\r\n • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.\r\n • Speed Ranges: 20:1 VT, 10:1 CT. 3:1 CT for 350 hp and up\r\n • 3 Leads Only\r\n • Vibration Not to Exceed 0.08 Inches per Second\r\n • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded\r\n • INPRO™ Seals Installed on Both Ends\r\n • Breather Drains in Both End Frames for Vertical Mount\r\n\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/ProdDesc\/MAXE2_841.pdf\"\u003eProduct Description\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/buy.tecowestinghouse.com\/EcommerceFiles\/Manuals\/TWMC%20Instruction%20Manual_143%20to%20449%20frame.pdf\"\u003eInstruction Manual\u003c\/a\u003e\r\n","brand":"TECO-Westinghouse","offers":[{"title":"Default Title","offer_id":43915351359581,"sku":"HB7\/56C","price":2126.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/files\/CPVD9C62335RON50.jpg?v=1766444950"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/4005\/8973\/collections\/GI553LFV135RON50.jpg?v=1766431053","url":"https:\/\/witmermotor.com\/collections\/footed-c-face-nema-premium-hb_c.oembed","provider":"Witmer Motor Service","version":"1.0","type":"link"}